Home > BANSEOK > CONTROLLER
Sort By:
Page of 2
AUTOMATIC-7
AUTOMATIC-7
Our Price: VND2,100,000.00

Time calibration type dispenser controller

You can get the exact dispensing
volume by auto-correcting the
difference of deposit volume might
happen in the depth of material/
liquid in barrel. Also, you can input
each different dispensing time of up to 10 channels.
 
 Inputting each different dispensing time
  to multi channels(up to 10 channels)
  helps you control the different
  dispensing volume easily.
 It has the function of auto - correcting
  the difference of dispensing volume by
  changing of material/liquid depth and
  position change of start point.
 The minimum time for auto-
  correction : 0.001sec (auto- revision
  of dispensing time per 100~500 shots in
  case of 50cc barrel)
 Easy to use LCD display type
 Intellectual controller in high speedy
  reaction.
 Fixed quantity dispensing in high
  precision is possible even though at the
  case of two type liquids changed in its
  viscosity.
 It is useful to cope with various
  changes, and you can realize perfect
  fixed – quantity dispensing on In- line.
 
Applied materials
Silicone, UV resin, Cream solder,
Silver paste, Epoxy, Bond etc.


TAD-200S
TAD-200S
Our Price: VND2,100,000.00

Barrel control dispenser controller

High performance controller with
our independently developed
microprocessor.
 
 High quality with the functions ; minimal
  amount dispensing control, high-speed
  work, and automatic dispensing and
  automatic stop by the interval work.
 Vacuum control stops liquid from
  flowing after dispensing finishes.
 Varied output functions facilitate
  automation and interface.
 The digital timer displayed on LED in
  manual mode makes it easy to set time.
 Memory the values for dispensing until
  you set the values again.
 
Applied materials
Silicone, UV resin, Cream solder,
Silver paste, Epoxy, Bond etc.
TAD-200V
TAD-200V
Our Price: VND2,100,000.00

Valve control dispenser controller

This controller has the same
function as TAD-200S and it is
suitable when a valve is used.
 
 High quality with the functions ; minimal
  amount dispensing control, high-speed
  work, and automatic dispensing and
  automatic stop by the interval work.
 Optimal to the fluid control of high
  tension with double action control type.
 Varied output functions facilitate
  automation and interface.
 The digital timer displayed on LED in
  manual mode makes it easy to set time.
 Memory the values for dispensing until
  you set the values again.
 
Applied materials
Silicone, UV resin, Cream solder,
Silver paste, Epoxy, Bond etc.
AUTOMATIC-3
AUTOMATIC-3
Our Price: VND2,100,000.00

Analog dispenser controller

Cost-effective analogue dispenser. Not restricted by working place with the advantage of its light and
compact size. Its simplified
construction makes even beginner
use the dispenser easily. It has two modes : manual/pre-set timer.
 
 Ideal for dispensing small amount of
  liquid as the analog time setting is
  possible from 0.02 sec to 3.39 sec.
 Vacuum function is equipped with this
  dispenser and it prevents dripping of
  fluid after dispensing.
 It is convenient to be installed in
  automatic machines due to its small
  and light size.
 Cost- saving choice.
 
Applied materials
Silicone, UV resin, Cream solder,
Silver paste, Epoxy, Bond etc.
TAD-2000S
TAD-2000S
Our Price: VND2,100,000.00

TAD-200S dual type

This 2-series controller has the
same function as TAD-200S and it is suitable when a robot is used.
 
▶ High quality with the functions ; minimal
  amount dispensing control, high-speed
  work, and automatic dispensing and
  automatic stop by the interval work.
 Vacuum control stops liquid from
  flowing after dispensing finishes.
 Varied output functions facilitate
  automation and interface.
 The digital timer displayed on LED in
  manual mode makes it easy to set time.
 Memory the values for dispensing until
  you set the values again.
 It is suitable for narrow space or
  automation lines as it has as many
  functions as two controllers have.
 
Applied materials
Silicone, UV resin, Cream solder,
Silver paste, Epoxy, Bond etc.
TAD-5000S / TAD-5000V
TAD-5000S / TAD-5000V
Our Price: VND2,100,000.00

TAD-200S / TAD-200V quintuple type

This 5-series controller has the
same function as TAD-200S/
TAD-200V and it is suitable when a
robot is used.
 
 High quality with the functions ; minimal
  amount dispensing control, high-speed
  work, and automatic dispensing and
  automatic stop by the interval work.
 Vacuum control stops liquid from
  flowing after dispensing finishes.
 Varied output functions facilitate
  automation and interface.
 The digital timer displayed on LED in
  manual mode makes it easy to set time.
 Memory the values for dispensing until
  you set the values again.
 It is suitable for narrow space or
  automation lines as it has as many
  functions as five controllers have.
 
Applied materials
Silicone, UV resin, Cream solder,
Silver paste, Epoxy, Bond etc.
TAD-200SP
TAD-200SP
Our Price: VND2,100,000.00

Vacuum pick-up control dispenser controller

Its vacuum pick up pen makes this
dispenser ideal for precise
dispensing with assembly of small
components and repairing /
reworking.  
 
 Two functions of dispensing and
  vacuum pick up are solved in one body.
 You transport the parts(work) with the
  vacuum pad while dispensing is
  operated.
 It’s ideal for assembly line after bonding
  lens, glass, small sized parts.
 You can adjust the range of vacuum
  according to size or weight of product.
 
 Vacuum pad is selectable among below
  sizes.
  Ø2, Ø3, Ø4, Ø5, Ø6, Ø8, Ø10, Ø12,
  Ø20, Ø32
 
Applied materials
Silicone, UV resin, Cream solder,
Silver paste, Epoxy, Bond etc.
EZ TEM-3
EZ TEM-3
Our Price: VND2,100,000.00

Barrel heater controller

Temperature control unit is
combined with its barrel. It preheats the high viscous materials in barrel by heating from the barrel to the
end of needle. It makes the
viscosity of materials weak and get high productivity. 
 
 Dual PID control function : High-speed
  response of PID control to reach to the
  desired value fast, low-speed of
  response of PID control to minimize the
  overshoot even though response is a
  little bit slow.
 High accuracy : ±0.3%
  (by F.S value of each input)
 2-Steps auto tuning control function.
 Multi-input function (13 kinds of multi-
  input selection function) : Temperature
  sensor, voltage and current selection
  function.
 Various sub output function : Includes
  in LBA, SBA, 7 kinds of alarm output
  and 4 kinds of alarm option function, PV
  value transmission output(4-20mADC),
  RS485 communication output.
▶ Display the decimal point for analog
  input.
BX-2
BX-2
Our Price: VND2,100,000.00

Analog tubing dispenser controller

 No abrasion to tube, no pulsation while
  dispensing.
 It has all functions like sucking liquid,
  rotation/backlash, auto timer, etc.
 Ideal for low-viscosity materials such
  as instant adhesives, ink, etc.
 Manual / auto timer controls the shot
  size, easy to use.
 Dispenses materials directly from the
  container of materials without using
  compressor air.
BRP-3
BRP-3
Our Price: VND2,100,000.00

Analog tubing dispenser controller

 No abrasion to tube, no pulsation while
  dispensing.
 Compact size, it can be combined with
  desk top robot and installed multi-
  controllers.
 Ideal for low-viscosity materials such
  as Instant glue, ink, etc.
 It has all functions like sucking liquid,
  rotation/backlash, auto timer, etc.
 Dispense materials directly from the
  container of materials without using
  compressor air.
 It is an inexpensive and popular model.